Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-2056002.png)
8. Disconnect the dashboard wire harness A 4P connector (A) from the cable reel 4P connector (B).
9. Disconnect the dashboard wire harness B 5P connector (A), and release the tab (B), then pull off the cable reel (C).
Installation
1. Before installing the steering wheel, align the front wheels straight ahead.
2. If not already done, disconnect the negative cable from the battery, and wait at least 3 minutes.
3. Set the turn signal canceling sleeve (A) so the projections (B) are aligned vertically.