Pilot 4WD V6-3.5L (2008)
During the repair process, inspect these areas:
-
Inspect all the SRS wire harnesses. Replace, don't repair, any damaged harnesses.
-
Inspect the cable reel for heat damage. If there is any damage, replace the cable reel.
Check the operation of the ODS unit must be checked after any of these actions.
-
Replacement of front passenger's seat component(s)
-
After a vehicle collision
After the vehicle is completely repaired, turn the ignition switch ON (II). If the SRS indicator comes on for about 6 seconds and then goes off, the SRS
airbag system is OK. If the indicator does not function properly, use the HDS SRS Menu Method to read the DTC.