Pilot 4WD V6-3.5L (2008)
Yaw Rate Sensor: Service and Repair
Yaw Rate-Lateral Acceleration Sensor Replacement
NOTE:
^
Do not damage or drop the sensor as it is sensitive.
^
Do not use power tools.
1. Make sure the ignition switch OFF.
2. Remove the center console.
3. Disconnect the connector (A).
4. Remove the yaw rate-lateral acceleration sensor (B).
5. Install the sensor in the reverse order of removal.
6. Do the VSA sensor neutral position memorization. See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Component Tests and General Diagnostics