Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-386002.png)
7. Remove and discard the valve stem (A), and the screw (B) from the tire pressure sensor (C).
NOTE: The valve stem grommet (D) might stay in the wheel; make sure you remove it.
Installation
NOTE:
^
Use only wheels that have a "TPMS" mark (A) on them.
^
The vehicle may be equipped with one of the three types of wheels.
1. Assemble the new valve stem (A), new screw (B), and the tire pressure sensor (C).
NOTE: Always use a new valve stem and new screw.