Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-1882002.png)
3. Remove the brake hose mounting bolt (A).
4. Remove the brake caliper mounting bolts (B), then remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper assembly
or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose with force.
5. Remove the wheel sensor (A) from the knuckle (B). Do not disconnect the wheel sensor connector.
6. Raise the stake (A) of the spindle nut (B), then remove and discard the nut.
7. Remove the brake disc.
8. Check the front hub for damage and cracks.
9. Remove the cotter pin (A) from the tie-rod end ball joint, then loosen the nut (B).