Pilot 4WD V6-3.5L (2008)
Intermediate Shaft
Special Tools Required
^
Oil seal driver attachment 07JAD-PH80101
^
Support base attachment 07LAF-SM40300
^
Driver 07749-0010000
^
Fork seal driver, 39.2 x 49.5 x 15 mm 07947-4630100
^
Support base 07965-SD90100
NOTE: Refer to the Exploded View, as needed, during this procedure.
1. Clean the disassembled parts with solvent, and dry them with compressed air.
NOTE: Do not wash the rubber parts with solvent.
2. Press the intermediate shaft bearing (A) into the bearing support (B) using the oil seal driver attachment (C), driver (D), and a press.