Pilot 4WD V6-3.5L (2008)
Wheel Bearing: Service and Repair
Rear Suspension
Knuckle/Hub/Wheel Bearing Replacement
Knuckle/Hub/Wheel Bearing
Special Tools Required
^
Ball joint remover, 28 mm 07MAC-SL0A202
^
Hub dis/assembly tool, 42 mm 07GAF-SD40100
^
Attachment, 62 x 68 mm 07746-0010500
^
Driver 07749-0010000
^
Support base 07965-SD90100
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Remove the wheel nuts and rear wheel.