Pilot 4WD V6-3.5L (2008)
Fluid Pressure Sensor/Switch: Service and Repair
3rd Clutch Transmission Fluid Pressure Switch Replacement
3rd Clutch Transmission Fluid Pressure Switch Replacement
1. Remove the splash shield.
2. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A) and
sealing washer (B).
3. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer, and tighten the switch.
4. Make sure there is no water, oil, dust, or foreign particles inside the connector.
5. Connect the connector securely.
6. Install the splash shield.