Prelude L4-1955cc 2000 (1987)
Throttle Cable/Linkage: Adjustments
Fig. 8 Throttle cable adjustment
1.
Check cable for freedom of motion and correct as necessary.
2.
Check cable freeplay at throttle linkage, proper deflection being 3/16-3/8 in. (4-10 mm).
3.
If deflection is not within specifications, turn adjusting nut until cable has no deflection, Fig. 8.
4.
Loosen adjusting nut until cable deflects within specifications, then tighten locknut.
5.
After adjusting the throttle cable, have someone press down on the accelerator pedal inside the car while checking for full throttle condition at the
carburetor.
6.
Readjust as necessary, staying within deflection specifications.
