Prelude L4-1958cc SOHC (1988)
38.
Install boots, mounts and steering gear.
39.
Install shift rod torque arm and torque to 9 ft. lbs.
40.
On vehicles with 5 speed transmissions, install rod and torque clevis bolts to 16 ft. lbs.
41.
Install pressure lines, then center beam, torquing bolts to 16 ft. lbs.
42.
Install tie rod to steering knuckle, torque castle nuts to 32 ft. lbs., then install cotter pins.
43.
Install steering shaft connector, then fill reservoir with fluid, start engine and check for leaks.
44.
Install shield, then front wheels.
W/4 Wheel Steering
Fig. 13 Exploded view of front steering gear unit. Prelude models w/4 wheel steering
