Prelude L4-1958cc SOHC (1988)
Control Arm Bushing: All Technical Service Bulletins
Suspension - Upper Arm Assembly Rattle Noise
Model
Applicable To
88-89
Through VIN
PRELUDE
JHMBA4...KC05583
File Under
Bulletin No.
91-021
SUSPENSION
Issue Date
JUNE 28, 1991
Rattle From Upper Arm Assembly Rattle Noise
PROBLEM
A rattling noise coming from the front or rear suspension while driving over small bumps or uneven surfaces.
PROBABLE CAUSE
Deteriorated bushings on the front and/or rear upper arm assemblies.
CORRECTIVE ACTION
Replace the upper arm assembly(s) that have the deteriorated bushings. Install new upper arm assembly(s) listed under PARTS INFORMATION, as
described in the service manual.
PARTS INFORMATION
Right Front Upper Arm Assembly:
P/N 51450-SF1-050 H/C 3416419
Left Front Upper Arm Assembly:
P/N 51460-SF1-050 H/C 3416435
Right Rear Upper Arm Assembly:
P/N 52390-SF1-050 H/C 3429727
Left Rear Upper Arm Assembly:
P/N 52400-SF1-050 H/C 3429735
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out-of-warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must
request consideration, and get the DSM's decision, before starting work.
^ Front Upper Arm Assembly
Includes: Alignment on 2WS vehicles and road test.
Operation Number
Flat Rate Time
416127 Left
1.4 Hours
416132 Right
1.4 Hours
416137 Both
1.9 Hours
A For 4WS alignment add
0.6 Hours
^ Rear Upper Arm Assembly
Includes: Alignment on 2WS vehicles and road test.
Operation Number
Flat Rate Time
418142 Left
1.4 Hours