Prelude L4-2.2L SOHC (1994)
7. Insert the balancer shafts into the block, then install the retainer to the front balancer shaft and block.
Right Side Cover
Cover Installation
8. Apply liquid gasket to the block mating surface of the right side cover. Apply a light coat of oil to the crankshaft and to the lip of the seal, then
install the cover on the engine block. Torque the 6 x 1.0 mm bolts to 12 Nm (1.2 kg-m, 9 lb ft).
NOTE:
-
Use liquid gasket, part No. 08718-0001.
-
Check that the mating surfaces are clean and dry before applying liquid gasket.
-
Apply liquid gasket evenly, being careful to cover all the mating surface.
-
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
-
Do not install the parts if 20 minutes or more have elapsed since applying the liquid gasket. Instead reapply liquid gasket after removing the
the old residue.
-
After assembly, wait at least 30 minutes before filling the engine with oil.