Prelude L4-2.2L SOHC (1994)
Exhaust:
0.27 - 0.32mm (0.011 - 0.013 in)
4. Tighten the locknut and check clearance again. Repeat adjustment if not within spec.
5. Rotate crankshaft 180° counterclockwise (camshaft pulley will turn 90°). The "UP" mark should be on the exhaust side. Adjust valves on No.3
cylinder.
6. Rotate crankshaft 180° counter clockwise to bring No.4 piston to TDC. Both TDC grooves are once again visible. Adjust valves on No.4 cylinder.
7. Rotate crankshaft 180° counterclockwise to bring No.2 piston to TDC. The "UP" mark should be on the intake side. Adjust valves on No.2
cylinder.
8. Re-torque crankshaft pulley bolt to 250Nm (181 ft.lbs). Install cylinder head cover.