Prelude L4-2.3L DOHC (1992)
7.
Install the antenna assembly into the car, but do not tighten the lower mounting nut at this time.
8.
Connect the power connector and the coaxial connector to the antenna assembly.
9.
Install the insulator and the antenna nut. Tighten the nut to 2.3 N-m (0.23 kg-m, 20 lb.in.).
10.
Tighten the lower mounting nut.
Parts Information
The replacement parts are listed by model. If the car you are repairing is equipped with the gold finish kit, you will need to order a new gold finish
antenna nut.
Accord Parts