honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Ignition Switch > < Wheel Speed Sensor|Front|Page 4586
Page 1
background image

Clutch Interlock Switch: Testing and Inspection

1.

Remove I/P lower cover and left knee bolster, then disconnect connector from switch.

2.

With clutch pedal released, check continuity between both terminals. No continuity should be found. If continuity is found, replace or adjust 
switch as necessary.

3.

With clutch pedal depressed, check continuity between both terminals. Continuity should be found. If no continuity is found, replace or adjust 
switch as necessary.

Ignition Switch > < Wheel Speed Sensor|Front|Page 4586