Prelude L4-2.3L DOHC (1992)
Windshield: Customer Interest
Windows - Buckled Windshield Molding In A Pillar Area
Bulletin No.
92-039
Issue Date
NOV 13, 1992
Model
1992
PRELUDE
Applicable To
See VEHICLES
AFFECTED
File Under
BODY
Buckled Windshield Molding
SYMPTOM
The windshield molding is buckled in the A-pillar area.
PROBABLE CAUSE
Insufficient adhesive on the windshield molding.
VEHICLES AFFECTED
1992 Prelude
S through JHMBA8 . . . NC012337
Si through JHMBB2 . . . NC028122
CORRECTIVE ACTION
Replace the windshield molding.
1.
Apply tape to the body around the windshield molding to protect the body finish.
2.
With a small flat-tip screwdriver pry up the body side edge of the molding to reveal the retaining clips. Insert the blade of the screwdriver under
the top half of each clip and pry up to release.
3.
Lift the upper molding out of the channel. Pull the windshield molding away from the V-shaped molding carefully. If this V-shaped molding is
