Prelude L4-2.3L DOHC (1992)
Wiper Motor: Testing and Inspection
Fig. 8 Front Wiper Motor Connector Terminal Identification
1.
Disconnect 5-pin connector at wiper motor, Fig. 8.
2.
Connect battery positive to the B (GRN/BLK) terminal and negative to the L (BLU) terminal. Motor should run smoothly at low speed. If it does
not, repair or replace as necessary.
3.
Connect battery positive to the B (GRN/BLK) terminal and negative to the HI (BLU/YEL) terminal. Motor should run smoothly at high speed. If it
does not, repair or replace as necessary.
