Prelude L4-2.3L DOHC (16 Valve) (1996)
![background image](/honda/prelude/l4-2.3l_dohc_(16_valve)/Page-1311001.png)
Seat Belt Retractor: Testing and Inspection
1. Before installing the retractor, check that the seat belt can be pulled out freely.
Retractor
2
Make sure that the seat belt does not lock when the retractor is leaned slowly up to 15° from the mounted position. The seat belt should lock when
the retractor is leaned over 40°.
CAUTION: Do not attempt to disassemble the retractor.
3. Replace the seat belt with a new one if there is any abnormality.