Prelude L4-2056cc DOHC (1990)
Fig. 4 Removing E-clips From Front Housing
4.
Remove E-clips, and separate booster housings, Fig. 4.
Fig. 5 Removing Booster Spring
5.
Remove seals and washers from spring retainer, then the 10 millimeter snap rings spring retainer and booster spring, Fig. 5.
6.
Remove flange locknuts and set plate.
7.
Remove valve holder assembly from rear housing.
8.
Remove rubber boots from through bolts, then the booster plate and diaphragm together from rear housing.
Fig. 7 Removing Through Bolts
9.
Remove snap ring, and through bolts with O-rings from rear housing, Fig. 7.