Prelude L4-2056cc DOHC (1990)
Tires: Testing and Inspection
Radial Tire Lead/Pull
"Lead/Pull" is vehicle deviation from a straight path, on a level road with no pressure on the steering wheel. Lead is usually caused by:
1. Poorly manufactured radial tires.
2. Uneven brake adjustment.
3. Wheel alignment.
The way in which a tire is built can produce lead in a car. An example of this is placement of the belt. Off-center belts on radial tires can cause the tire to
develop a side force while rolling straight down the road and the tire will tend to roll like a cone. The "Radial Tire Lead/Pull Correction" chart should be
used to make sure that front wheel alignment is not mistaken for tire lead. Rear tires will not cause lead/pull.
