honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

ABOUT US
Variable Valve Timing Solenoid|Locations|Page 1348 > < Variable Valve Timing Solenoid|Locations

Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)

Page 1
background image

Variable Valve Timing Solenoid: Testing and Inspection

1. Disconnect the 1P connector from the VTEC solenoid valve.

2. Measure resistance between the terminal and body ground.

Resistance: 14 - 30 Ohms

3. If the resistance is within specifications, remove the VTEC solenoid valve assembly from the cylinder head, and check the VTEC solenoid valve

filter for clogging.
If there is clogging, replace the engine oil filter and the engine oil.

Variable Valve Timing Solenoid|Locations|Page 1348 > < Variable Valve Timing Solenoid|Locations