Prelude L4-2157cc 22L DOHC (VTEC) MFI (2001) Air Bag Control Module Spec
4. Disconnect the SRS main harness 18P connector from the SRS unit.
5. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the bracket.
6. Install the new SRS unit.
NOTE: Do not reuse a torx bolt that has red threads. Replace the bolt with a new one.
7. Connect the SRS main harness 18P connector to the SRS unit; push it into position until it clicks.
8. Put the carpet back in place.
9. Reconnect the driver's airbag 2P connector to the cable reel 2P connector, then reinstall the access panel on the steering wheel.
10. Reconnect the front passenger's airbag connector to the SRS main harness.