Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
remove the knuckle.
NOTE: Replace the bearing with a new one after removal.
28. Separate the hub from the knuckle using the special tool and a hydraulic press.
CAUTION:
-
Take care not to distort the splash guard.
-
Hold onto the hub to keep it from falling when pressed clear.
29. Remove the circlip and the splash guard from the knuckle.
30. Press the wheel bearing out of the knuckle using a hydraulic press and the special tools shown below.