Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
![background image](/honda/prelude/l4-2157cc_2.2l_dohc_(vtec)_mfi/Page-1617021.png)
39. Apply steering grease to the circumference of the rack end housing.
40. Coat the rack end groove and inside of the boot with silicone grease.
41. Install the boots in the rack end with the tie rod clamps.
NOTE: Install the boots with the rack, in the straight ahead position (right and left tie-rods are equal in length).
42. Adjust the air tube fitting position of the boots by turning it as shown below.
43. Connect the air tube between the right and left boot, then install the clips on the cylinder line A as shown.