honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Powertrain Control Module (PCM): > < TCM - MIL ON, DTC P0740 Stored
Page 2
background image

2.

Clear DTC P0740 with the PGM Tester.

3.

Raise the car.

4.

Drain the transmission, and refill it with Honda ATF.

5.

Start the engine, shift to D4, then bring the speed up to 50 mph. Make sure the transmission shifts through all four gears and the torque converter
locks up.

6.

Apply the brakes to stop the wheels.

7.

Shift to reverse, then to neutral.

8.

Repeat steps 5, 6, and 7 four more times.

9.

Turn off the engine.

10.

Repeat steps 4 through 9 two more times.

11.

Drain the transmission, and refill it with Honda ATF Put a new washer on the drain plug.

12.

Test-drive the car.

^

If the MIL does not come on, return the car to the customer.

^

If the MIL comes on with DTC P0740, replace the transmission.

Disclaimer

All Technical Service Bulletins for Powertrain Control Module (PCM): > < TCM - MIL ON, DTC P0740 Stored