Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
3. Using an O-ring pick or similar tool, pull up the outer edge of the molding, and apply 3M Black Super Silicone Sealant under it, along the A-pillars
and the upper edge of the windshield.
4. Push down on the molding, and smooth it out until it sits flush with the roof.
5. Wait 5 minutes, then remove the masking tape.
6. Clean up any excess sealant with 3M General Purpose Adhesive Cleaner.
Disclaimer