Ridgeline V6-3.5L (2006)
Lock Cylinder Switch: Testing and Inspection
In-Bed Trunk Lid Key Cylinder Switch Test
1. Remove the trunk lid trim.
2. Disconnect the 2P connector from the key cylinder switch.
3. Check for continuity between the terminals. There should be continuity between the No. 1 and No. 2 terminals when the in-bed trunk M key
cylinder switch is in UNLOCK position. There should be no continuity between the No. 1 and No. 2 terminals when the ire-bed trunk lid key
cylinder switch is in the released (neutral) position.
4. If the continuity is not as specified, replace the in-bed trunk lid key cylinder switch.