Ridgeline V6-3.5L (2006)
6. Reconnect all connectors to the under-dash fuse/relay box. Turn the ignition switch ON (II), and make these input tests at the appropriate
connectors on the driver's under-dash fuse/relay box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 7.
Relay Control Module
7. Turn the ignition switch OFF.
8. Remove the under-hood fuse/relay box.
9. Remove the under cover from the under-hood fuse/relay box, and disconnect the connector H (18P).
10. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
-
If the terminals look OK, go to step 11.