Ridgeline V6-3.5L (2006)
Alarm Module: Testing and Inspection
Control Unit Input Test
NOTE: Before troubleshooting the keyless entry/security control system, troubleshoot the multiplex integrated control system first using B-CAN
System Diagnosis Test Mode A.
Make sure the ignition switch OFF before troubleshooting the under-dash fuse/relay box.
MICU
1. Turn the ignition switch OFF.
2. Remove the left kick panel.
3. Disconnect the under-dash fuse/relay box connectors.
NOTE: All connector views are wire side of female terminals.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.
