S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
Power Mirror Motor: Service and Repair
Power Mirror Actuator Replacement
1. Remove the power mirror from the door.
2. Record the terminal locations and wire colors.
3. Cut the wire harness with a wire cutter.
4. Carefully pull out the bottom edge of the mirror holder by hand.
5. Separate the mirror holder from the actuator by slowly pulling them apart.
6. Remove the screws and the actuator from the housing.
7. Remove the wire harness of the new actuator through the hole of the mirror housing, then install the new actuator in the reverse order of removal.