S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
Cruise Control Module: Testing and Inspection
Cruise Control Unit Input Test
SRS components are located in this area, review the SRS component locations, precautions, and procedures before performing repairs or service.
1. Remove the knee bolster under the steering column.
2. Disconnect the 14P connector from the cruise control unit.
3. Inspect the connector and connector terminals to be sure they are making good contact.
4. If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
Part 1