S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
Throttle Cable/Linkage: Adjustments
Throttle Cable Adjustment
1. Check cable free play at the throttle linkage. Cable free play (A) should be 4 - 6 mm (3/16 - 1/4 in.).
2. If free play (A) is not within spec (4 - 6 mm, 3/16 - 1/4 in.) loosen the locknut (B), turn the adjusting nut (C) until the free play (A) is as specified,
then retighten the locknut (B).
3. With the cable properly adjusted, check the throttle valve to be sure it opens fully when you push the accelerator pedal to the floor. Also check the
throttle valve to be sure it returns to the idle position whenever you release the accelerator pedal.