S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
7. Remove the screws (A) from the cable reel, then remove the cable reel from the column.
Installation
1. Before installing the steering wheel, the front wheels should be aligned straight ahead.
2. Disconnect the battery negative cable, and wait at least 3 minutes.
3. Set the cancel sleeve (A) so that the projections (B) are aligned vertically.
4. Carefully install the cable reel (A) on the steering column shaft. Then connect the 4P connector (B) to the cable reel, and connect the 2P connector
(C) to the SRS main harness.
5. Install the steering column covers.