S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
_mfi/Page-1481001.png)
Front Steering Knuckle: Service and Repair
Front
Knuckle/Hub Replacement
Special Tools Required
-
Ball joint remover, 28 mm 07MAC-SL00200
-
Bearing driver attachment, 72 x 75 mm 07746-0010600
-
Driver, 07749-0010000
-
Support tease, 72 x 78/82.6 mm 07965-SD90100
-
Hub disassembly tool, 07GAF-SD40200
1. Loosen the wheel nuts slightly.
2. Raise the front of the vehicle, and make sure it is securely supported.
