S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
Stabilizer Bar: Service and Repair
Stabilizer Bar
Front
Replacement
1. Raise the front of the vehicle, and make sure it is securely supported. Remove the front wheel.
2. Remove the clips (A) and flange bolts (B), then remove the splash guard (C).
3. Remove the self-locking nuts (A) while holding the joint pins (B) with a hex wrench (C), and disconnect the stabilizer links (D) from the stabilizer
bar (E) on the right and left.