S2000 L4-2.2L (2004)
Trunk / Liftgate Spring: Service and Repair
Trunk Lid Torsion Bar Replacement
Special Tools Required
Torsion bar assembly tool 07AAF-SNAA100
NOTE:
-
Take care not to scratch the body.
-
Put on gloves to protect your hands.
-
Use a torsion bar tool to remove and install the torsion bars
-
Remove the right torsion bar first, and then remove the left torsion bar.
1. Remove the trunk lid torsion bars as shown.
2. Install the torsion bars in the reverse order of removal, and note these items:
-
The right torsion bar has a piece of rubber on it as shown. Install the right and left torsion bars in their proper locations.
-
Make sure the trunk lid opens properly and locks securely.