S2000 L4-2.2L (2004)
Trim Panel: Service and Repair
Trim Removal/Installation - Seat Side Area
Trim Removal/Installation - Seat Side Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the door sill trim.
2. Remove the trim as shown.
3. Install the trim in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Push the clips into place securely.
-
For removable hardtop: Make sure the rear window defogger connector is plugged in properly (left side only).