S2000 L4-2.2L (2004)
4. Using vernier calipers, measure the thickness of each brake pad lining. The measurement does not include the pad backing plate (A) thickness.
5. If the brake pad thickness is less than the service limit, replace the front pads as a set.
6. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
7. Check the brake disc for damage and cracks.
8. Install the pad retainers (A).
9. Apply Molykote M77 grease (P/N 08798-9010) to the brake pad side of the shims (A) and back of the brake pads (B). Wipe excess grease off the
pad shim. Contaminated brake discs or pads reduce stopping ability. Keep grease off of the brake discs and brake pads.
10. Install the brake pads and pad shims correctly. Install the brake pads with the wear indicator (C) on the inside.