S2000 L4-2.2L (2004)
15. Connect battery power to PGM-FI main relay 7P connector terminal No. 2 and connect ground to the PGM-FI main relay 7P connector terminal
No. 1. Then check for continuity between PGM-FI main relay 7P connector terminals No. 5 and No. 4.
NOTE: Use the terminal numbers shown. Ignore the terminal numbers molded into the relay.
Is there continuity?
YES - Go to step 16.
NO - Replace the PGM-FI main relay and recheck the circuit.
16. Connect battery power to PGM-FI main relay 7P connector terminal No. 5, and connect ground to PGM-FI main relay 7P connector terminal No.
3. Then check for continuity between PGM-FI main relay 7P connector terminals No. 7 and No. 6.
Is there continuity?
YES - Go to step 17.
NO - Replace the PGM-FI main relay and recheck the circuit.
17. Connect battery power to PGM-FI main relay 7P connector terminal No. 6, and connect ground to PGM-FI main relay 7P connector terminal No.
1. Then check for continuity between PGM-FI main relay 7P connector terminals No. 5 and No. 4.
Is there continuity?
YES - The PGM-FI main relay is OK.
NO - Replace the PGM-FI main relay and recheck the circuit.