S2000 L4-2.2L (2004)
1. Place the new passenger's airbag (A) into the dashboard. Tighten the passenger's airbag mounting nuts (B).
2. Connect the passenger's airbag 2P connector (A) to the SRS main harness.
Attach the passenger's airbag connector to the connector holder (B), then reinstall the passenger's dashboard lower cover.
3. Reconnect the battery negative cable.
4. After installing the airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6
seconds and then go OFF.