S2000 L4-2.2L (2004)
14. Remove the stabilizer bar holder brackets (A) from the frame, and lower the stabilizer bar (B).
15. Disconnect the ground cable (A) and motor 2P connector (B). Loosen the harness band (C), and release the wire harness (D) from the gearbox.
After disconnecting the connector, put a piece of tape over the steering gearbox connector to protect it from dust, dirt, and foreign materials.
16. Disconnect the torque sensor 3P connector (A). After disconnecting the connector, put a piece of tape over the steering gearbox connector to
protect it from dust, dirt, and foreign materials.