S2000 L4-2.2L (2004)
5. Raise the stake (A) of the spindle nut (B), and remove the nut.
6. Remove the 6 mm brake disc retaining flat-head screws (A).
7. Screw two 8 x 1.25 mm bolts (B) into the disc to push it away from the hub. Turn each bolt two turns at a time to prevent cocking the disc
excessively.
8. Remove the brake disc from the knuckle.
9. Check the hub for damage and cracks.
10. Remove the self-locking nut (A), cam plate (B), and adjusting bolt (C), then disconnect the control arm (D) from the frame.