S2000 L4-2.2L (2004)
21. Press the wheel bearing (A) out of the knuckle (B) using the special tools and a press.
22. Press the wheel bearing inner race (A) out of the hub (B) using the special tool, a commercially available bearing separator (C), and a press.
23. Wash the knuckle and hub thoroughly in a high flash point solvent before reassembly.
24. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the special tool, and a press. Place the wheel
bearing on the knuckle with the pack seal side facing (E) (metal color) toward the inside. Be careful not to damage the sleeve of the pack seal.