S2000 L4-2.2L (2004)
6. Install the castle nut (A) onto the lower ball joint pin, and tighten it to the specified torque value.
7. Install a new cotter pin (B).
8. Tighten the flange bolt connecting the damper bottom to the lower arm to the specified torque value.
9. Tighten the flange nuts on the top of the damper to the specified torque value.
10. Install the brake hose mounting bracket (A) and the flange bolt (B) to the damper, and tighten the bolt to the specified torque value.
