Accent L4-1.6L (2003)
4. After installing the master cylinder, install the brake tube to the master cylinder.
5. Connect the vacuum hose to the brake booster.
CAUTION:
^
Make sure that there are no bend, twist, or leaks in the vacuum hose.
^
When installing the vacuum hose to the vacuum pipe, the vacuum pipe should be inserted to the depth of 25 - 27 mm (0.98 - 1.06 inch) as
shown in the illustration.
6. Fill the brake reservoir with brake fluid, and bleed the system.
7. Check for brake fluid leaks.
8. Inspect and adjust the brake pedal.
