Accent L4-1.6L (2003)
10. Move the rack completely toward the housing and mount the rack tooth portion in a brass plate of a vise. At the state of step 11, loosen the tie rod
ball joint, then remove the tie rod assembly from the rack.
11. Remove the rack from the gear housing.
CAUTION: Remove the rack toward the left side of the vehicle so as not to damage the bushing by the rack teeth.
REASSEMBLY
1. Apply the specified grease to the rack, insert the rack into the gear housing, and then insert the pinion into the gear housing.
-
Make sure that the rack is inserted into the gear housing from the left side.
-
When inserting the pinion into the gear housing, the pinion gear should be in mesh with the rack gear.
-
Wipe off excessive grease.
2. Prior to oil seal installation in the gear box, apply grease to the surface of the oil seal.
NOTE: Be sure to use a new oil seal.
