Accent GL L4-1.6L (2001)
5. Press 'YES' to operate motor pump and solenoid valve.
6. Wait 60 sec. before operating the air bleeding. (If not, you may change the motor.)
5. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without bubbles. Then close the bleeder screw.
6. Repeat step 5 until there are no more bubbles in the fluid for each wheel.
7. Tighten the bleeder screw.
Bleeder screw tightening torque: 7 - 9 Nm (70 - 90 kg cm, 5 - 6.6 ft. lbs.)