Accent GL L4-1.6L (2001)
1. Be careful not to drop any injectors when removing the delivery pipe.
2. Be aware that fuel may flow out when removing the injector.
INSTALLATION
1. Install a new grommet and O-ring to the injector.
2. Apply a coating of solvent, spindle oil or gasoline to the O-ring of the injector.
3. While turning the injector to the left and right, fit it on to the delivery pipe.
4. Be sure the injector turns smoothly.
NOTE: If it does turn smoothly, the O-ring may be jammed: Remove the injector and re-insert it into the delivery pipe and recheck.