Accent GL L4-1.6L (2001)
This option automatically detects the ECM type and downloads the correct program.
8.
Enter "1229" as the password for the automatic update mode and press ENTER.
9.
The Hi-Scan Pro will establish communication and check the ECM ID. The Hi-Scan Pro will reprogram the ECM automatically.
NOTE:
^
The Hi-Scan Pro detects the current ECM ID, assigns the new ECM ID and displays them for about 1 second.
^
To be prepared in case a reprogramming error occurs, write down the "NEW ECM ID" displayed on the Hi-Scan Pro screen during
reprogramming.
^
It will be used during the Manual Update Procedure if the program does not download correctly.
^
If the Hi-Scan Pro does not download the program, use the Manual Update Procedure following this section.
^
Check the ECM IDs displayed on the Hi-Scan Pro screen to verify that the correct ECM software is being downloaded. Refer to the "ECM
SPECIFICATION TABLE" in this bulletin for the ECM ID listing.
WARNING:
Do not interrupt the reprogramming at any time. The ECM will be rendered inoperative if the program does not download completely.