Accent GL L4-1.6L (2001)
Control Module: All Technical Service Bulletins
A/T - Shift Shock/Delayed Engagement
Group: TRANSAXLE
Number: 03-40-010
Date: JUNE, 2003
Model: 2000-02 ACCENT 1.6L ATA
Subject
SHOCK OR DELAYED ENGAGEMENT DURING
PARK TO REVERSE OR PARK TO DRIVE SHIFT
TCM REPROGRAMMING INSTRUCTIONS
DESCRIPTION:
Some 2000-2002 MY Accent 1.6L vehicles may experience the following condition:
^
Shock or delayed engagement during Park to Reverse or Park to Drive shift
The following procedure describes updating the transaxle control module (TCM) software by using the Hi-Scan Pro.
VEHICLES AFFECTED:
TCM SPECIFICATIONS:
CAUTIONS BEFORE REPROGRAMMING:
1.
Conduct reprogramming with the ignition key in the "ON" position.
2.
Be careful not to disconnect any cables connected to the vehicle or Hi-Scan Pro during reprogramming.
WARNING:
If reprogramming is interrupted, the manual update procedure must be used.
3.
Do not start the engine during reprogramming.
4.
Do not turn the ignition key off during reprogramming.
5.
When the reprogramming is completed, turn off the ignition key for 20 seconds before starting the engine.